DBCBK-19 船用燃油輔鍋爐控制系統
1.滿足要求
1.1.滿足《<中華人民共和國船員培訓管理規則>實施辦法》（海船員〔2019〕340號）規定的技術要求。
1.2.IMO關于海員培訓、發證及值班標準國際公約（STCW78/95）規定的要求
1.3.中國海事部門《關于STCW78/95公約過渡規定的實施辦法》
“海船船員適任證書考試、評估和發證規則”及相應的訓練評估規范的要求。
2.設備圖片：
3.設計要求
1.指示燈
| 序號 | 名稱 | 顏色 | |
| 1 | FLAME-EYE ABNORMAL | R | |
| 2 | IGNITION FAILURE | R | |
| 3 | MIS-IGNITION | R | |
| 4 | BLR. DRM. LEVEL TOO LOW | R | |
| 5 | BLR. DRM. LEVEL LOW | R | |
| 6 | BLR. DRM. LEVEL HIGH | R | |
| 7 | F. O. PRESS TOO LOW | R | |
| 8 | F. O. PRESS LOW ALARM | R | |
| 9 | F. O. TEMP. TOO LOW | R | |
| 10 | F. O. TEMP. LOW ALARM | R | |
| 11 | F. O. P/P ABNORMAL STOP | R | |
| 12 | BLR. STM. PRESS HIGH | R | |
| 13 | BLR. STM. PRESS LOW | R | |
| 14 | AIR PRESS LOW | R | |
| 15 | BNR. MOTOR TRIP | R | |
| 16 | WIND-BOX TEMP. HIGH | R | |
| 17 | FURNACE ABNORMAL | R | |
| 18 | SOURCE FAILURE | R |
| 序號 | 名稱 | 顏色 | 注 |
| 1 | OPERATION SOURCE | G | |
| 2 | BNR. ST-BY (BNR. AUTO) | G | |
| 3 | PRIM.AIR FAN RUNNING | G | |
| 4 | F. D. FAN RUNNING | G | |
| 5 | IGNITION OIL PUMP RUNNING | G | |
| 6 | NO.1 F.O. P/P RUNNING | G | |
| 7 | NO.2 F.O. P/P RUNNING | G | |
| 8 | NO.1 WATER P/P RUNNING | G | |
| 9 | NO.1 WATER P/P RUNNING | G | |
| 10 | FIRE ( D. O. MIXING) | G | |
| 11 | THERMOSTAT BY-PASS | Y | |
| 12 | SPARE F.O. P/P ST-BY | Y | |
| 13 | MAIN F.O. V/V OPEN | Y |
| 序號 | 名稱 | 顏色 |
| 1 |
THERMOSTAT BY-PASS OFF ON |
|
| 2 |
F. O. HEATER MAN STOP AUTO |
|
| 3 |
F. O. P/P CONTROL MAN STOP AUTO |
|
| 4 |
FEED WATER P/P CONTROL MAN STOP AUTO |
|
| 5 |
F. O. FLOW CONTROL MAN AUTO |
|
| 6 |
F. O. FLOW MAN. DEC. INC. |
|
| 7 |
LAMP TEST / BNR. TRIP TEST RESET |
|
| 8 | ALARM ACK.(SOUND OFF) | |
| 9 | EM’CY STOP | |
| 10 | BUZZER |
| 序號 | 名稱 | 顏色 | 注 |
| 1 |
F.O. P/P SELECT NO.1 USE NO.2USE |
2位選擇開關 | |
| 2 |
F.O. P/P SELECT NO.1 USE (NO.2 ST-BY) NO.2 USE(NO.1 ST-BY) |
2位選擇開關 | |
| 3 |
BNR.OPERRATION MAN-STOP-AUTO-AUTO ‘ON’ |
4位選擇開關 |
| 序號 | 名稱 | 實現方式 | |
| 1 | FLAME-EYE ABNORMAL | 程序 | |
| 2 | IGNITION FAILURE | ||
| 3 | MIS-IGNITION | ||
| 4 | BLR. DRM. LEVEL TOO LOW | 電位計 | |
| 5 | BLR. DRM. LEVEL | ||
| 6 | BLR. DRM. LEVEL HIGH | ||
| 7 | F. O. PRESS TOO LOW | 鈕子開關 | |
| 8 | F. O. PRESS LOW ALARM | 鈕子開關 | |
| 9 | F. O. TEMP. TOO LOW | 鈕子開關 | |
| 10 | F. O. TEMP. LOW ALARM | 鈕子開關 | |
| 11 | F. O. P/P ABNORMAL STOP | 程序 | |
| 12 | BLR. STM. PRESS HIGH | 電位計 | |
| 13 | BLR. STM. PRESS LOW | ||
| 14 | AIR PRESS LOW | 鈕子開關 | |
| 15 | BNR. MOTOR TRIP | 程序 | |
| 16 | WIND-BOX TEMP. HIGH | 鈕子開關 | |
| 17 | FURNACE ABNORMAL | 鈕子開關 | |
| 18 | SOURCE FAILURE | 鈕子開關 |
| 序號 | 名稱 | 實現方式 |
| 1 | BLR. DRM. LEVEL | 液位儀表 |
| 2 | BLR. STM. PRESS | 壓力顯示儀表 |
| 3 | AIR/OIL FLOW CONTROLLER | 電位計調節和顯示儀表 |
| 4 | BLR. STM. TEMP. | |
| 5 | BLR. STM. FLOW |